| GENERAL CHARGES | | |
| Hourly Service Charge | $65.00 |
| Minimum Charge Per Gun | $50.00 |
| Clean & Oil Gun (completely strip gun) | $65.00 |
| Clean & Oil Double Barrel (completely strip gun) | $110.00 |
| Test Fire Customers Gun - Does not include the cost of ammo | $45.00 |
| Written Appraisal | $45.00 |
| Written Estimate | $45.00 |
| |
| BARREL WORK | | |
| Chamber and Fit Barrel to Action -Does not include cost of barrel, action, polishing or reblueing | $250.00 |
| Install Pre-threaded and Chambered Barrel Does not include cost of barrel, polishing and Blueing | $150.00 |
| Install Barrel Liner - Does not include cost of liner or reblueing | $125.00 |
| Straighten/Adjust Barrel | $50.00 |
| Install Muzzle Brake | $95.00 |
| Cut and Crown Barrel | $60.00 |
| Make Chamber Cast | $75.00 |
| Check Headspace | $50.00 |
| Lap Barrel | $70.00 |
| Remove Obstruction from Bore | $75.00 |
| Remove Fired Case from Chamber | $60.00 |
| Remove Live Round from Chamber | $100.00 |
| Flute Barrel | $175.00 |
| |
| ACTION WORK | | |
| Recontour Front or Rear Receiver Ring | $90.00 |
| Forge or Weld on Bolt Handle | $100.00 |
| Lap in Bolt Lugs - does not include setting back barrel | $50.00 |
| Adjust Non Adjustable Trigger | $75.00 |
| Install or Adjust Timney Style Trigger | $45.00 |
| Install Double Set Trigger | $100.00 |
| Install Beuhler Type Safety | $45.00 |
| Install Mod. 70 Style 3 Position Safety | $150.00 |
| Make and Install Spring | $75.00 |
| |
| BLUEING | | |
| Draw Filing- per hour | $65.00 |
| Bead Blast Stainless Steel | $90.00 |
| Hot Tank Reblueing - Bead Blast Finish | $150.00 |
| Hot Tank Reblueing - #240 grit polish (includes removing minor pits) | $160.00 |
| Hot Tank Reblueing - #400 grit polish (same as #140 grit finish but polished to #400) | $170.00 |
| Hot Tank Reblueing - Mirror polish (remove all polish marks) | $220.00 |
| Hot Water Rebluing ( double barrels must be blued this way) | $220.00 |
| Baking Lacquer Finish/Teflon-Moly Finish | $125.00 |
| Metal Checkering | $65.00/Hour |
| |
| REVOLVER WORK | | |
| Action Job - clean & smooth action -Does not include parts | $90.00 |
| Chamfer Revolver Barrel | $45.00 |
| Chamfer Revolver Cylinder | $40.00 |
| Install Crane Lock | $45.00 |
| Straighten Revolver Crane | $45.00 |
| Rebarrel Handgun with Factory Barrel | $100.00 |
| Bob Hammer Spur | $45.00 |
| |
| SEMI AUTO HANDGUN WORK | | |
| Action Job - clean & smooth action -Does not include parts | $90.00 |
| Tighten Slide on Semi Auto | $90.00 |
| Rebarrel Handgun | $100.00 |
| Install Beavertail Grip Safety - does not include cost of safety or refinishing | $100.00 |
| Bob Hammer Spur | $45.00 |
| Metal Checker Front Strap of Frame | $175.00 |
| Install Compensator | $200.00 |
| Open Ejection Port | $50.00 |
| Bevel Magazine Well | $50.00 |
| Throat & Polish Feed Ramp & Barrel of Semi Auto | $50.00 |
| |
| SHOTGUN WORK | | |
| Cut Long Forcing Cone in Non Plated Barrel | $75.00 |
| Raise Dent in Barrel | $100.00 |
| Polish Bore & Chamber | $40.00 |
| Port Barrel | $60.00 |
| Install Screw-in Choke | $125.00 |
| Resolder Forend Lug - does not include blueing | $100.00 |
| Resolder Rib - does not include blueing | $180.00 |
| Make New Hinge Pin | $125.00 |
| |
| SIGHT WORK | | |
| Bore Sight Customers Gun | $25.00 |
| Sight in Customers Gun - Does not include ammo or targets | $65.00 |
| Pattern Shotgun - Does not include cost of ammo or targets | $65.00 |
| Install Sight Bead on Shotgun | $35.00 |
| Install Insert in Pistol Sight | $35.00 |
| Cut Dovetail in Barrel | $75.00 |
| Drill & Tap Barrel Or Receiver for Sights - Per Hole | $30.00 |
| Install Receiver Sights - Gun drilled and tapped | $35.00 |
| Install Scope and Mounts - Gun drilled & tapped | $40.00 |
| Install Scope and Mounts - Gun not drilled and tapped | $80.00 |
| Install Sight Ramp | $50.00 |
| Install Band Type Front Sight Ramp | $75.00 |
| |
| STOCK WORK | | |
| Glass Bed Rifle | $100.00 |
| Pillar Bed Rifle and Free Float Barrel | $190.00 |
| Fit and Bed Barreled Action in Fiberglass Stock | $100.00 |
| Inlet and Finish of Semi-Inletted Stock | $300.00 |
| Custom Stock From Blank - Does not include blank or furniture | $2500.00 |
| Refinish Stock - Unfilled | $150.00 |
| Refinish Stock - Filled and hand rubbed high shine | $225.00 |
| Install Recoil Pad - labor only | $55.00 |
| Install Leather Covered Recoil Pad - labor only | $200.00 |
| Install Sling Swivels | $40.00 |
